Product Features

  • Easy to use
  • Factory loaded re-sealable cartridges (320ml, 850ml), convenient 2.5 oz. (71ml) tube
  • 75% solids by weight
  • Low Permeability & no porosity
  • Temperature good to 450°F (244°C)
  • 1655 psi tensile strength
  • 285% elongation

Benefits

  • No mixing, no mess
  • Indefinite product life, eliminates expensive Viton® waste
  • Caulk will not break down in harsh conditions
  • Assures corrosion protection
  • Exceeds most high temperature caulks
  • Great bonding properties
  • Flexible
Fluorodyn Caulk made with Viton

Thermodyn Corporation introduces the ideal solution for splicing fluoroelastomer parts and for use as a coating to prevent corrosion in virtually all environments. This revolutionary caulk, based on Viton® fluoroelastomer and produced in conjunction with Dupont Performance Elastomers, provides excellent sealing for flanges or lining in pipe, Flueduct and Chimney brick

Fluorodyn Caulk made with Viton® is compounded with 75% solids making it an easy to apply, single component caulk. This advanced compound system provides excellent corrosion resistance in the uncured state, as well as increased resistance after curing, to virtually all chemicals, including nitric, sulfuric and hydrochloric acids. Fluorodyn Caulk made with Viton® is recommended for harsh, corrosive environments that require flexibility, leak-proof sealing, and high resistance to permeation.

Fluorodyn Caulk is available only from Thermodyn in the following sizes: 2.5 oz. (71ml) tube, pint (320ml), quart (850ml) caulking tubes with resealable applicator.

Targeted Applications: Flurodyn Caulk

  • Chemical & Corrosion resistance
  • Aliphatic, aromatic, and halogenated hydrocarbon resistance
  • Flue duct expansion joint repair
  • Viton® repair
  • UV & Ozone resistance
  • Environment protection
  • Adheres to all metals, concrete, glass and ceramics
  • High temperature
  • Sealing flanges