 |
||||||||
 |
 |
 |
 |
 |
 |
 |
 |
|
Caulks Product Information Chemical Resistance Application Coatings THP-1000 Application THP-2000 Application Adhesives THA-3000 Application MSDS Sheets |
  Fluorodyn THP-2000 Two Part Coating made with VITON® was developed with the same patented base polymer as THP-1000. This coating with accelerator offers superior chemical resistance when material must be fully cured, and heat is not an option. THP-2000 coated surfaces can be back in service in as little as 17 hours after application. THP-2000 is resistant to the same chemicals as our patented single component caulk and THP-1000 coating. THP-2000 is easy to mix and ready to use in 15-20 minutes. THP-2000 withstands temperature extremes from -20°F to 450°F with excursions to 500°F. It is resistant to over 350 fluids including concentrated acids and hydrocarbons. It adheres to many surfaces, offering a tough, flexible, long-lasting coating. Easily applies by • Brush • Roller • Airless Sprayer • Dip Coating Quantities Avaliable • Quarts (.95L) • 1 Gallon (3.8L) • 5 Gallon (19L) Standard coating is 35% solids by weight and can be easily thinned to desired consistency. THP-2000 and accelerator are factory measured for ease of use. Color: Black (White and grey available by special order.) THP-2000 Theoretical Coverage
Application Instructions |
|||||
 Home | About Us | Capabilities | Expansion Joints and Materials | Gasket Materials | Caulks & Coatings | Molded Rubber Products | Contact Us © Copyright 1998-2004 Thermodyn Corporation. All rights reserved |
||||||